View Datasheet in other language

E-mail to a friend

Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of PENTAMID AHT H1 black - (PA46+PA66) - Pentac Polymer GmbH

Material Data Center offers the following functions for PENTAMID AHT H1 black:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Pentamid AHT datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:

Caracteristicas de procesamiento y fisicas - Propiedades mecánicas - Propiedades térmicas - Otras propiedades - Propiedades específicas del material - Recomendación para procesamiento Moldeo por inyección

Any use of this information falls under the rules of our disclaimer.

Caracteristicas de procesamiento y fisicas

Seco / Cond

Unidades

Método de ensayo

ISO Data

Contracción posterior al moldeo, paralelo

2.0 / *

ISO 294-4, 2577

Contracción posterior al moldeo, normal

2.1 / *

ISO 294-4, 2577

Propiedades mecánicas

Seco / Cond

Unidades

Método de ensayo

ISO Data

Módulo de tracción

3000 / 1000

MPa

ISO 527

Esfuerzo de fluencia

100 / 55

MPa

ISO 527

Alarg. en límite elástico

15 / 25

ISO 527

Módulo de flexión, 23°C

3250 / -

MPa

ISO 178

Resistencia a la flexión

125 / -

MPa

ISO 178

Resistencia al impacto Charpy, +23°C

N / N

kJ/m²

ISO 179/1eU

Resistencia al impacto Charpy c/entalla, +23°C

10 / 30

kJ/m²

ISO 179/1eA

Propiedades térmicas

Seco / Cond

Unidades

Método de ensayo

ISO Data

Temperatura de fusión, 10°C/min

285 / *

°C

ISO 11357-1/-3

Estabilidad al calor, 1.80 MPa

160 / *

°C

ISO 75-1/-2

Estabilidad al calor, 0.45 MPa

270 / *

°C

ISO 75-1/-2

Combustibilidad a 1.5mm esp. nom.

HB / *

class

IEC 60695-11-10

Espesores de probeta

1.6 / *

Otras propiedades	Seco / Cond	Unidades	Método de ensayo
Absorción de agua	10 / *	%	Sim. to ISO 62
Absorción de humedad	3.6 / *	%	Sim. to ISO 62
Densidad	1180 / -	kg/m³	ISO 1183

Propiedades específicas del material

Seco / Cond

Unidades

Método de ensayo

ISO Data

Indice de viscosidad

140 / *

cm³/g

ISO 307, 1157, 1628

Recomendación para procesamiento Moldeo por inyección	Valor	Unidades	Método de ensayo
Temperatura de pre-secado	80	°C	-
Tiempo de pre-secado	2 - 12	h	-
Humedad de procesamiento	≤0.09	%	-
Temperatura del molde	80 - 120	°C	-
Temperatura - zona de alimentación	80	°C	-
Zona 1	295	°C	-
Zona 2	305	°C	-
Zona 3	310	°C	-
Zona 4	315	°C	-
Zona 5	310	°C	-

Características

Procesamiento y forma de entrega

Moldeo por inyección

Forma de suministro

Sémola, Negro

Características especiales

Estable contra el calor

Resistencia quimica

Resistencia al aceite

Certifications

RoHS

Disponibilidad regional

Europa

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.